manualshive.com logo in svg

golmar Jazz GB2, User Manual

Share
Download
golmar Jazz GB2 User Manual Download Page 5

5

Exploded view of the parts of the panel.

Aluminium front

Electronic module

Shield

Description of the door panel:

INSTALLATION OF THE DOOR PANEL

Locate the top of the door panel at a height of 1.65m.

The door panel has been designed to withstand diverse environmental conditions. It is however advisable to take

extra precautions to prolong its service life, such as using the shield supplied or locating it in a covered area.

For optimum image quality, avoid direct contact from light sources (sunshine, street lights, etc.)

.

Location of the door panel:

DESCRIPTION OF THE JAZZ SURFACE PANEL

-

JAZZ J5110/PENTHA 1P KIT (Code 11500243).

-

JAZZ/1RF SURFACE PANEL (Code 11525551).

-

JAZZ/2RF SURFACE PANEL (Code 11525552).

JAZZ GB2 VIDEO DOOR ENTRY SYSTEM KIT - HOUSE

1650

1850

1450

Description of the TK3401/GB2 proximity access key kit:

MASTER

CARD

ADD

MASTER

CARD

DELETE

Management keys for adding/deleting residents' keys using the proximity reader. Supplied

with the video door entry kit.

MASTER CARD ADD

: Key for adding residents' proximity keys.

MASTER CARD DELETE

: Key for deleting residents' proximity keys.

X5

TAGKEY residents' access keys (Code 20740427).

Note: Access keys configured from factory.

Note:

To add/delete proximity keys, follow the instructions on pp. 12.

Summary of Contents for Jazz GB2

























Reviews:

No comments

Brands by name

Popular brands

Load more brands