Positioning the
:
nameplate label
Positioning the button identification labels:
After completing the wiring and configuration work, position the
nameplate label in the electronic module. Fix using the screws
supplied.
Important:
Before closing the
, make a test call
nameplate label
to the apartment(s) to ensure that it works correctly.
ON
1
2
3
The DIP switch is located on the right side of the circuit, accessible by opening the
door panel.
1 2
3
ON
Door panel address: (DIP 3 always OFF).
DIP switches: 1 and 2 OFF (address 1), 1 ON and 2 OFF (address 2), 1 OFF and 2
ON (address 3), 1 and 2 ON (address 4).
*
( )
*
( )
Important: To select the address of the door panel (DIP 3 must always be OFF):
11
INSTALLATION OF THE DOOR PANEL
Setting the door panel address:
Configure door panel addresses as described below:
Important:
Position the
at the top with the black band visible.
nameplate label
A
B
C
Open the label cover (figure A ), insert the label (figure B ) and close (figure C ).
Customise and download the 'JAZZ LABELLER KIT REV.0117' label from Golmar's documentation website:
https://doc.golmar.es/search/manual/50180198
Open the label cover
*
( )
*
( )
JAZZ GB2 VIDEO DOOR ENTRY SYSTEM KIT - HOUSE
