Goldwing 91in SLICK540 60CC, Manual

Page: 34 / 49

5. Assemble the throttle servo mount using the supplied laser cut parts or there is a servo cutout in the
bottom of the engine box for 50cc-70cc engines. Mount your throttle servo and complete your linkage setup.
A hole will need to be drilled on the firewall to allow the pushrod to connect to the throttle arm on the carb.
6. An extra servo can be fitted for choke or a mechanical linkage can be used.
7. The new KUZA 700cc Fuel Tank with aluminum tank cap is preassembled. Complete the installation in the
fuselage using zip ties or velcro straps to hold the tank in position. Connect a fuel line between the tank and
carb, a fuel line between the tank vent and the bottom of the fuselage, and a fill line to a fueling port which
can be mounted on the fuselage side opposite your ignition switch. Make sure your vent line does not come
close to any hot exhaust part such as the muffler or canister. GW recommends the use of small zip ties or fuel
line clamps to secure the lines to the tank.