Settings
18
11. LNB settings
•
On «System settings» menu select «LNB settings» and press
OK
.
•
Use the
p
q
keys to navigate among the options.
•
Press
i
key to get a helping window. Close it with
OK
.
Three default settings are available for LNBs, and further three settings
are user-defined. You can set the following parameters:
•
LNB name
: With the
t
u
keys choose among “Universal”,
“Single High”, “Single Low”, “1”, “2” or “3”. If you select one
among “Universal”, “Single High” or “Single Low”, you can not
change the other settings.
•
Osc. 1
: With the remote control numeric keypad insert a
frequency for the low band oscillator.
•
Osc. 2
: With the remote control numeric keypad insert a
frequency for the high band oscillator.
•
22 kHz
: With the
t
u
keys choose “yes” or “no” whether you
want, or not, the receiver to send the oscillator selecting tone.
12. Antenna settings
•
On «System settings» menu select «Antenna settings» and
press
OK
.
•
Use the
p
q
keys to navigate among the options.
•
Press
i
key to get a helping window. Close it with
OK
.
Depending on your system, you can choose between two configurations:
a) Direct feed
If you own a satellite antenna (dish) with only one LNB:
•
Select the «Direct feed» entry and press
OK
.
You can set two parameters:
•
Satellite
: With the
t
u
keys choose the satellite your
antenna is pointing to, among the twentyfour available.
•
LNB type
: With the
t
u
keys choose a LNB setting name.
Note
: In most cases the “Universal” setting will be good for
your system.
Summary of Contents for Galaxis SX
Page 2: ......
