Settings
[
Edizione del 23/08/2002
]
9
a.7) Exit the edit channels list section.
For exiting the edit channels list section…
•
Press the
Exit
key.
Note:
Changes will be available after saving settings on main menu.
b) Edit the favourite channels lists
The third and the fourth entries of the «Edit lists» menu allow you to
enter the edit favourite TV or radio lists section. You can rename each
list.
Eight list names are shown on the screen.
•
With the
p
q
keys, select the list to edit.
Here you can also rename the selected list, by pressing the
BLUE
key.
The characters insertion is the same as the one described at point
a.5)
(see).
•
Press
OK
to edit the list.
You enter the edit list section.
b.1) Choose the list to edit
At first, the «Program list» is selected, which contains all the channels
stored in memory. Press the
BLUE
key to pass to the favourite list.
Press the
BLUE
key again, to go back to the «Program list»…
You can edit the favourite list only.
b.2) List scrolling
Often, a list contains more channels than it can show at the same time in
its window. There are two way for scrolling a list:
•
With the
p
q
keys you move through the channels shown into
the window. Once you reach an extremity, a further key pressure
will show the next page into the window.
•
With the
t
u
keys you can directly go to the next or the
previous page.
b.3) Change position of one or more channels
•
With the
p
q
keys, select the channel you want to move and
press
OK
. The channel name color becomes yellow and the low
side of the screen shows «Selected channels:1». To move more
than one channel at once, select the first channel, then select
the last channel you want to move, and keep pressed
OK
for two
seconds.
•
With the
p
q
keys, go to the channel, above which you want to
paste the selected channel(s).
Summary of Contents for Galaxis SX
Page 2: ......
