Settings
[
Edizione del 23/08/2002
]
11
a) Timer setting.
•
With the
p
q
keys, select on the shown grid an empty slot
•
Press, and keep pressed for two seconds, the
OK
key.
Note
: if there aren’t free slots, an event must be deleted. See below how
to remove a timer.
a.1) Choose a channel.
After releasing the
OK
key, on the leftmost column –named «Channel»-
appears the name of the channel, which the receiver was tuned on
before entering the Setup section.
•
Use the
p
q
keys to change the channel.
a.2) Choose the starting day.
•
With the
t
u
keys, set the focus on the second column from the
leftside, named «Day».
•
Use the
p
q
keys to change the starting day.
a.3) Choose the starting hour.
•
With the
t
u
keys, set the focus on the third column from the
leftside, named «Start».
•
Use the
p
q
keys to change the starting hour, with 30 minutes
steps.
•
Use the remote control numeric keypad to set the hour with
precision.
a.4) Choose the ending hour.
•
With the
t
u
keys, set the focus on the fourth column from the
leftside, named «End».
•
Use the
p
q
keys to change the ending hour, with 30 minutes
steps.
•
Use the remote control numeric keypad to set the hour with
precision.
a.5) Event repetition.
A timer can be set for turning on/off periodically at the same time.
•
With the
t
u
keys, set the focus on the fifth column from the
Summary of Contents for Galaxis SX
Page 2: ......
