7. TECHNICAL DATA
INJECTOR SIZES
Conversion to other gases
GPGD24,36,48 GPG
GPGDSA24-36,60 GPGDB12
Inner
Outer
N.G 2.05
2.1
1.6
1.1
2.15
L.P. 1.3
1.3
1.0
0.7
1.25
CONVERSION INSTRUCTIONS
To convert from N.G. to L.P. gas do the following:
1.
Replace N.G. burner injectors with L.P. injectors (refer to table on following
page).
2
Replace pilot injectors to required size.
N.G. #32
L.P. #22
3.
Disconnect regulator from gas supply line & reconnect LP Regulator.
4.
Reset pressure test point on manifold to 2.60 kPa.
5.
Adjust burner aeration slide.
IM027B2/p10
