Goldstar MV1610ST, Service Manual

Page: 21 / 43

7-10
H. ASSEMBLING DOOR
(1) When mounting the door assembly to the oven
assembly, be sure to adjust the door assembly
parallel to the chassis. Also adjust so the door has
no play between the inner door surface and oven
frame assembly. If the door assembly is not
mounted properly, microwaves may leak from the
clearance between the door and the oven.
I. REMOVING THE VENTILATION FAN ASS'Y
(1) Remove the mounting plate by removing two
screws securing it to the back plate.
(See Figure 16)
(2) Remove the two screws securing the MOUNT, ALL
and one screw securing the ventilation fan ASS'Y.
(See Figure 17)
(3) Carefully pull the ventilation motor ASS'Y out of the
microwave oven. (See Figure 18)
J. REPLACING THE HUMIDITY SENSOR
(For sensor model only)
(1) Remove the sensor by removing two screws
securing it to the air duct. (See Figure 18-a)
(2) Mount the new humidity sensor to the air duct.
Space
MOUNT, ALL
Figure 16
Figure 17
Figure 18
Figure 18-a