Goldstar MV1610ST, Service Manual

Page: 19 / 43

7-8
D. REMOVING MAGNETRON
(Figures 11 Through 13)
(1) Remove vertgrille.
(2) Remove mount, all.
(3) Remove outcase.
(4) Discinnect the wireleads.
(5) Remove the Magnetron very carefully.
NOTES:
• When removing the magnetron, make sure that its
dome does not hit any adjacent parts, or it may be
damaged.
• When replacing the magnetron, be sure to install the
magnetron gasket in the correct position and be sure
that the gasket is in good condition.
• After replacing the magnetron, check for microwave
energy leakage with a survey meter Check
microwave energy leakage must be below the limit of
5 mW/cm
2 . (All service adjustments should be made
for minimum microwave energy leakage readings.)
vertgrille
mount all
outcase
Magnetron
Figure 11
Figure 12
Figure 13