K. REMOVING THE TURNTABLE MOTOR
(1) Remove the turntable.
(2) Remove the turntable shaft VERY CAREFULLY
with a slotted screwdriver. (Figure 21)
(3) Remove the base plate by removing 6 screws
securing it to the oven cavity. (Figure 22)
(4) Disconnect the leadwire from the turntable motor
terminals.
(5) Remove the 2 screws securing the turntable motor
to the oven cavity ASS'Y. (Figure 23)
NOTES:
•
Remove the leadwire from the turntable motor
VERY CAREFULLY.
•
Be sure to grasp the connector not the wires when
removing.
K. REMOVING THE STIRRER FAN MOTOR
(1) Remove all screws from out case and remove
the out case.
(2) Remove 5 screws securing the air duct to the
oven cavity, and remove 2 screws securing the
stirrer fan motor to the bracket. (Figure 24)
(3) Lift the air duct and disconnect the leadwire from
the stirrer fan motor. (Figure 25)
(4) Remove the stirrer fan motor.
Wire Leads
Turntable Motor
Figure 23
Figure 21
Figure 22
Figure 24
Figure 25
7-11
Summary of Contents for MV-1525B
