5
M8 Split Washer
(72)–4
M6 Locknut
(56)–4
M8 Locknut
(66)–4
M10 Split
Washer (54)–3
M6 x 38mm Button
Bolt (57)–4
M10 x 17mm Patch
Screw (55)–3
M4 x 4.5mm
Patch Screw
(70)–1
M4 x 16mm
Screw (77)–4
M8 x 16mm Patch
Screw (84)–2
M8 Washer
(85)–2
Wave Washer
(78)–2
M10 x 78mm Patch Screw (65)–2
M10 x 22mm Patch
Screw (4)–5
Assembly requires two persons.
Place all parts of the exercise bike in a cleared area and remove the packing
materials. Do not dispose of the packing materials until assembly is completed.
In addition to the included tool(s), assembly requires an adjustable wrench and a Phillips
screwdriver .
Use the drawings below to identify the small parts needed for assembly. The number in parentheses below each
drawing is the key number of the part, from the PART LIST near the end of this manual. The number following the
key number is the quantity needed for assembly.
Note: If a part is not in the hardware kit, check to see if it
has been preassembled. To avoid damaging parts, do not use power tools for assembly.
ASSEMBLY
