9
Bolts and washers
preattached in Logen
5. Identify the Right Handrail (64), which is marked
“Right.” Have a second person hold the Right
Handrail near the Right Upright (76).
Route the Upright Wire (63) into the bottom of
the Right Handrail (64) and out of the hole in the
Right Handrail.
Be careful not to pinch the Upright Wire (63).
Insert and partially tighten a 5/16" x 3/4" Screw
(5) with a 5/16" Star Washer (6) into the Right
Upright (76) and the Right Handrail (64). Then,
partially tighten a 5/16" x 3" Screw (7) with a
5/16" Star Washer (6) into the Right Handrail
and the Right Upright. Do not fully tighten the
Screws yet.
Attach the Left Handrail (not shown) in the
same way. Note: There are no wires on the left
side.
76
5
63
64
6
6
7
5
6
6. Set the console assembly face down on a
soft surface to avoid scratching the console
assembly.
Remove the two screws (C) from the Console
Crossbar (61). Remove the Console Crossbar.
Discard the screws.
Console
Assembly
C
61
C
