background image

14

FEATURES OF THE CONSOLE  

The treadmill console offers a selection of features       

designed to make your workouts more effective. When 

you select the manual mode of the console, you can 

change the speed and incline of the treadmill with the 

touch of a button. As you exercise, the console will 

display continuous exercise feedback. You can even 

measure your heart rate using the built-in handgrip 

heart rate monitor. 

The console also features four preset weight-loss 

workouts designed to help you to burn calories and 

enhance your cardiovascular system while toning and 

strengthening your muscles. Note: The weight-loss 

workouts require the use of dumbbells. To purchase 

additional dumbbells, call the telephone number 

on the front cover of this manual.

In addition, the console offers four preset performance 

workouts. Each workout controls the speed and incline 

of the treadmill as it guides you through an effective 

exercise session.

To turn on the power, see page 15. To use the man-

ual mode, see page 15. To use a preset workout, see 

page 17. To use the information mode, see page 18. 

To use the dumbbells, see page 18.

IMPORTANT: If there is a sheet of plastic on the 

face of the console, remove the plastic. To prevent 

damage to the walking platform, wear clean ath-

letic shoes while using the treadmill. The first time 

the treadmill is used, observe the alignment of the 

walking belt, and center the walking belt if neces-

sary (see page 22).

Note: The console can display speed and distance in 

either miles or kilometers. To find which unit of mea-

surement is selected, see THE INFORMATION MODE 

on page 18. For simplicity, all instructions in this man-

ual refer to miles. 

CONSOLE DIAGRAM

ETGG39610

(GGTL39610)

Summary of Contents for Stride Trainer 410





























Reviews: