10
5. Slide the two Weight Bumpers (27) onto the
Lower Weight Guides (25).
Orient seven Weights (22) so that the pin holes
are on the bottom as shown. Slide the Weights
onto the Lower Weight Guides (25).
Insert the Weight Tube Cap (23) into the Weight
Tube (24). Next, insert the Weight Tube into the
seven Weights (22).
Make sure that the pin on
the Weight Tube is oriented as shown.
Apply some of the included grease inside the
indicated holes in the remaining Weight (22).
Then, slide the Weight onto the Lower Weight
Guides (25).
5
22
25
25
22
27
23
24
Pin
Pin
Hole
Grease
6. Tighten the Upper Weight Guides (21) onto the
Lower Weight Guides (25).
Next, attach the Top Frame (4) to the Upper
Upright (3) with two M8 x 65mm Bolts (68), two
M8 Washers (59), and two M8 Locknuts (58).
Do not tighten the Locknuts yet.
Attach the Top Frame (4) to the Upper Weight
Guides (21) with two M10 x 25mm Bolts (74).
Do not tighten the Bolts yet.
6
4
3
58
74
59
59
68
58
25
21