38
You only need to make this setting if you connected this player to your amplifier
using the 6 channel analog outputs.
This setting does not affect digital audio output.
When set to
Fix
, the level of each of the 6 channel analog outputs is fixed.
Choose
Variable
if you want to adjust the relative levels to balance the surround
sound better for your listening room.
You can set the individual channel levels between –6dB and +6dB using the test
tone output as a guide to set the correct levels.
Adjust the levels until the output level from all channels sounds the same from
your usual listening position.
Automatic
: Select
Auto
to start the test tone output.
As the test tone plays through each speaker in turn, it is highlighted on-screen.
Use the cursor up/down buttons to adjust the channel output level of the current
speaker.
Note that the test tone is not output from the subwoofer. Press (cursor left) to exit
the test tone sequence, or
ENTER
to save the settings and exit the channel level
setting screen.
Manual:
Use the cursor up/down buttons to select a speaker. Press (cursor right)
then use the cursor up/down buttons to set the channel output level.
To turn the test tone on/off for an individual speaker, press (cursor right). The test
tone continues playing even when you select a different speaker.
Press
ENTER
to save the settings and exit the channel level setting screen.
16. CLEANING
Always disconnect the power cord from the wall socket before cleaning your
DVD player.
To clean the front panel metal parts, always use a very soft cloth to avoid to
scratch the surface.
You may use a soft cloth slightly wet if you have no specific cleaner available.
17. MAINTENANCE
The Goldmund EIDOS 18 player does not require any specific maintenance.
