37
AUDIO OUT (2ch)
jacks. Change to
2 Channel
if you want to listen to
downmixed stereo audio (for example, because you are listening through the
TV’s built-in speakers).
- When set to
5.1 Channel
there is no digital output when playing DVD-Audio.
- If you set to
2 Channel
, Dolby Digital, DTS and MPEG audio is mixed down to
two channels so you still hear all the audio recorded on the disc.
- Some DVD-Audio discs don’t allow down-mixing of audio. These discs always
output multi-channel audio regardless of the setting made here.
Speaker Installation
• Set in Setup Navigator (default:
L/R: Large
|
C: Large
|
LS/RS: Large
|
SW:
On
)
You only need to make this setting if you connected this player to your amplifier
using the 5.1 channel analog outputs.
This setting does not affect digital audio output.
Use the Speaker Installation screen to tell the player what kinds of speakers you
have connected.
1 - Use the cursor up/down buttons to select a speaker
Note :
The
L
and
R
, and
RS
and
LS
speakers are paired; you can’t set them
differently.
2 - Press (cursor right) to modify the selected speaker.
3 - Use the cursor up/down buttons to change the current setting.
Notes :
You can see the effect of your changes in the room graphic on the right
of the screen.
- Except for the subwoofer, you can set speaker size to
Large
or
Small
. If the
main speaker cone in the speaker is 12cm or more, set to
Large
, otherwise set
to
Small
(or
Off
if you don’t have that speaker).
- If you set the front
L
and
R
speakers to
Small
, the center and surround
speakers are automatically set to
Small
and the subwoofer to
On
.
- The subwoofer can only be set to
On
or
Off
.
4 - Press (cursor left) to go back to the speaker list if you want to modify
another speaker, or press ENTER to exit the Speaker Installation screen.
Notes :
When listening to a DVD-Audio or DTS source, the
C
,
LS
, and
RS
speakers will automatically be set to the
Large
size setting. However, the sound
will not be affected by the change. Listening to another source will return the
speakers to their original settings.
- For DVD-Audio only, if the
C
,
LS
, or
RS
speaker is set to
Off
, the audio is
automatically down-mixed to stereo.
Channel Level
• Default setting:
Fix
