36
DVD-Audio discs can have up to 9 groups of tracks. When set to
Single
, the
selected group plays and then the disc stops, or returns to the menu screen. Use
Group Search to select the group to play.
(You cannot use the track skip or scan buttons in this mode.)
Set to
All
if you want to play all the groups on a disc consecutively.
Note :
Even if the player is set to
All
but you select a group to play from the disc
menu, only that group will play. If you stop playback, all groups will play again
when you restart playback.
DVD Playback Mode
• Default setting:
DVD-Audio
Some DVD-Audio discs contain DVD-Video content in addition to the DVD-Audio.
Set to
DVD-Video
to play a DVD-Audio disc as if it were a DVD-Video disc. Note
that in this case only the DVD-Video part of the disc will play.
SACD Playback
• Default setting:
2ch Area
SACD discs can be divided up into several different areas : stereo audio (
2ch
Area
), multi-channel audio (
Multi-ch Area
) and, for hybrid SACDs, standard CD
audio (
CD Area
). Select which you want to listen to.
Note :
If you select an area that isn’t on the disc loaded, a different area will play.
For example, if you choose standard CD audio but the disc loaded is not a hybrid
SACD, the stereo SACD area will play.
CD Playback
• Default setting:
PCM Playback
When set to
PCM Playback
, playback is optimized for standard audio CDs. You
can also play DTS CDs, however you may notice some noise when a DTS CD
starts playing. This is not a malfunction.
When set to
DTS CD Playback
, playback is optimized for DTS CDs. In this mode
you cannot play standard audio CDs through the analog outputs. Change the
setting back to
PCM Playback
to play standard CDs.
Speakers
Audio Output Mode
• Set in Setup Navigator (Default:
2 Channel
)
If you connected this player to your amplifier using the 6 channel analog outputs
(front, surround, center and subwoofer outs), set this to
5.1 Channel
; if you
connected only the stereo outs, set to
2 Channel
.
Notes :
Even if you set
Audio Output Mode
to
5.1 Channel
, you’ll only get
sound from all speakers when playing a multichannel DVD-Audio disc, SACD, or
Dolby Digital or DTS encoded DVD disc.
- When set to
5.1 Channel
, only the front left/right channels are output from the
