ET-747 IP Phone User Manual
button light will turn on-off. User can press this button to try to register
9. MESSAGE
10. Menu / OK
P phone is at idle state, this key is used as “Menu” key to bring
enu selection/setting on the LCD display, this key is used
pper layer of the menu selection.
the IP phone is editing some menu item’s contents, this key is
NUM
formation in characters, press this button and
13.
y
er
nother party. If the call transfer is
successful, a busy tone will appear to notice the user to on-hook the phone.
all is failed, the user can press this “Transfer” key again to retrieve
again to their service provider.
This is for future use of functions upgrade.
When the I
out the menu selection on the LCD display.
When inside the m
as “OK” key to enter into a lower layer of menu selection or to accept the
edited item’s contents.
When the IP phone is on dial mode, the “OK/Menu” key is used as “Dial
Out” key.
11. Cancel
When the IP phone is entered into the menu selection, this key is used to
escape to an u
And when
used to cancel current edit and escape to an upper layer of the menu
selection.
12. TXT
←→
When users need to press in
alphabets shown on the keypads will be displayed.
TRANSFER
This key is pressed to transfer an active call to another IP phone. When the
IP phone is active(incoming call answered or outgoing call accepted), b
pressing this key, a dial tone will be heard, then the user can key in anoth
IP phone’s number to transfer the call to a
If the c
back this original call connection.
12
Summary of Contents for ET-747H
Page 51: ...ET 747 IP Phone User Manual 50...
