ET-747 IP Phone User Manual
3
The ET-747 series IP Phone is designed to be installed and used very friendly and
easily, so, almost all the configurations can be done through the keypads and LCD
screen display on the phone set in a few minutes. In order to make a VoIP call,
please do the configurations through keypads as described in the following few
sections.
Notice:
(1). When need to input an English character in any menu item, please press
that key button quickly to switch between different characters to set the
correct one needed.
(2). When the input mode is in digit mode(only can input ‘0’~’9’ and ‘*’,’#’), if
←→
NUM” key first
to toggle to “character” input mode.
3.1
vironment and phone models, please use the proper method to
configure the IP Phone to connect to Internet.
3
Most of the network environment at office or at hotel room or at home is
under a NAT (IP sharing device)/router device, under this environment, the most
easy
confi
and c
Configure
►
Password
：
135
►
Network
►
(Yes/No) Dynamic IP
Configuration from Keypads
want to input English character, please press “TXT
Network
Configuration
The first thing in using the ET-747 IP Phone is to set the network
configuration to let the IP Phone connect to internet. Depends on your
network en
.1.1 Dynamic IP Method (DHCP)
way to connect to internet is using the DHCP method. The IP Phone when
gured using the following method, it will get the IP parameters dynamically,
onnect to internet automatically.
Please press “ok” key to set Yes on (Yes / No) Dynamic IP when using
DHCP method.
Most of the cable modem connection also use this DHCP method.
19
Summary of Contents for ET-747H
Page 51: ...ET 747 IP Phone User Manual 50...
