20
Figure 11
E. Installing the HIMALAYAN SALT BLOCK PANEL and BENCH
1. Installing the HIMALAYAN SALT BLOCK PANEL can be done by sliding it
downward between the two side wall panels. (see Figure 12)
2. Plug in the FLOOR HEATER cord and light connection (for the
HIMALAYAN SALT BLOCK illumination) into the corresponding wall
outlets.
3. Install
the BENCH with the smooth and finished side facing upwards as
also seen in Figure 13. Be sure to slide the BENCH all the way in and
against the REAR WALL PANEL. If screws were provided, it is optional to
use them to screw down the bench.
Figure 12