2).
Two Needle Type
雙針系列
Loosen the screw (A) and (B) and then move gear (C)
up or down to adjust the height of wheel feed.
將螺絲(A)和(B)旋鬆,上下移動齒輪(C)即可調整送
料齒高度。
5.
Adjust Height of Hook
調整旋梭高度
Set the height of the hook to allow the needle thread to go through the gap between the bobbin case
stop and the niche beneath the needle plate, while maintaining the bobbin case stop remained in the
niche when the hook rotates either forward or backward. Loosen the set screw (A) of eccentric pin
(B), and screw (C) of collar, and screw (D) of bevel gear to turn the eccentric pin (B) in order to
adjust the height of hook and the bushing simultaneously.
調整旋梭的高度以使針線可通過內釜止與針板下方凹槽之間的間隙,並在旋梭正轉或逆轉時
使內釜止不致脫離針板下方凹槽。鬆開偏心銷(B)的固定螺絲(A),固定環的固定螺絲(C),以
及傘齒輪的固定螺絲(D),轉動偏心銷(B)以便調整旋梭與套管的整體高度。
11
GOLDEN WHEEL