Buzzaround XL_SG_REVA_100711
41
2.5k ohms +/- 10%?
Outside that range?
No
Yes
10 ohms or less on each one? Open on any wire?
Disconnect the control
panel harness (12a) from
the throttle pot (13a).
Insert multimeter probes into
the throttle pot connector
(13a) at the blue wire and
orange wire (outside two
pins). See figure 25.
Replace the
throttle pot.
Insert the multimeter probes
into the throttle pot connector
(13a) at the orange wire and the
yellow wire. See figure 26.
Note the resistance reading.
Insert the multimeter probes
into the main harness connector
at the yellow wire and the
orange wire. See figure 27.
Note the resistance reading.
Are both readings
within 500 ohms of
each other?
Check the orange,
blue, and yellow wires
on the main harness
for continuity.
Replace the
throttle pot.
Replace the
main harness.
Replace the
control panel.