29
1
When you enter to “Information” menu, you
will see a screen like above. The screen
displays :MODEL ID,S/W VERSION,H/W
VERSION,LOADER VERSION,LATEST
UPDATE,STB SN,STB ID,VFD Version.
2
Press [Exit] key to draw back to “Tools”
menu.
12.2 Satellite Guide
When you enter to “Satellite Guide” menu, you
will see the screen like below:
“Satellite Guide” is use for user to enter local
longitude; local latitude and satellite longitude.
By the evaluation from the receiver evaluate the
antenna azimuth and antenna elevation; user
can follow this guidance to adjust antenna.
1
You can use number keys to input
parameters in “Local Longitude”, “Local
Latitude” and “Satellite Longitude”.
2
You can use [Left/Right] key to select east
or west in “Local Longitude” and “Satellite
Longitude”, select north and south in
“Local Latitude”.
3
Moving highlight to “Start” item and press
[OK] key. The lower column on the screen
will calculate the corresponding value
automatically.
4
Orientation means the angle between
south and satellite.
5
Press [Exit] key to draw back to “Tools”
menu.
12.3 Default Setting
12.3.1 Default Setting:
When you press [OK] key In the “Default
Setting” item:
1
There will pop a dialogue for you to enter
the password, and the default password is
“
0000
”.
2
After you input the correct password,
there will show a warning message to
inquiry you “The operation will load default
and erase all the channels that user
added, continue?”.
3
If you select “OK” option, the all revised
parameters of the receiver will reset to
default value. Please carefully to using
this function.
