GM Electronics Ltd
.
are not an objective of the search). In
“Silent”
mode, the detector
achieves a better “rejection” of junk metals and provides a much
more efficient search of large objects.
10.Rejection of small metal objects.
Often, in an area where large metal objects are searched for and
the metal detector is set to high sensitivity, many (unwanted)
small metal targets could be indicated. Decreasing the sensitivity
and/or use of
“Silent”
mode sometimes could return acceptable
results, but the
Golden Mask Deep Hunter Pro3
provides the
ability to eliminate small metal objects without reducing the
sensitivity. This is accomplished with the
“TRASH”
knob. The
lower the value selected with this knob, smaller metal objects are
detected. After doing some tests with multiple "samples" of
different metallic objects and sizes, you will learn which values of
the
“TRASH”
settings are best for your needs.
11.Charging the built-in battery:
To ensure longer life of the
built-in battery it must be charged with only the supplied charger.
You should regularly check the charge level of the built-in battery
with the button
“Battery Check”
(inspection is possible only
when the detector is switched “On”) and you must turn off the
detector once the red LED "Battery" (located in the lower right
corner of the indicator) is lit.
To charge the built-in battery
:
1
. Turn
“Off”
the detector, remove the coil jack and plug the
charger jack into the connector labeled
“Charge”
on the front
panel of the device.
2
. Place the detector in an upright position near a power
outlet with voltage 120-240V and connect the automatic charger
into the outlet.
Golden Mask Deep Hunter Pro3 – Instruction manual
10
