GM Electronics Ltd
.
the device with the
“SENSITIVITY”
knob, which will reduce the
depth of detection, but this is the only way to achieve stability in
such conditions.
7.
After extensive work with the detector, with repeated
attachment and removal of search coil connectors, the connector
could be damaged - please carry out these activities very
precisely and carefully to avoid costly and severe damage.
Contact points of the connector should be kept clean and dry.
8.
If the indicator
“SIGNAL”
shows a negative value (arrow
deviates to the left of zero) after lifting the coil from the ground,
this means that a metallic object was located under the coil. In
such cases, move the coil to another location, turn on the device
again, press briefly the
“RETUNE”
button and start the search.
9.
Switch-on the detector for about 15 minutes in the area of
search before starting to search for metal objects. During this time
the
Golden Mask Deep Hunter PRO3
electronics are self-
adjusting to the ambient temperature/humidity and the detector
reaches its optimum operating capabilities.
10.
Do not attempt to use the detector after the built-in battery is
discharged as this can result in damage to the battery and/or the
electronics.
11.
Always keep the electronics clean from dust, grease and
moisture. Use only dry and soft cotton cloth for cleaning.
12.
If you use the detector in areas where there is possibility of
the presence of buried weapons and/or explosives, you must
proceed with great caution. The manufacturer and the dealers are
not responsible for the any damage or injuries resulting from such
use of the detector.
Golden Mask Deep Hunter Pro3 – Instruction manual
13