GM Electronics Ltd
.
8.
If the indicator
“SIGNAL”
shows a negative value (arrow
deviates to the left of zero) after lifting the coil from the ground,
this means that a metallic object was located under the coil. In
such cases, move the coil to another location, turn on the device
again, press briefly the
“RETUNE”
button and start the search.
9.
Switch-on the detector for about 15 minutes in the area of
search before starting to search for metal objects. During this time
the
Golden Mask Deep Hunter PRO5
electronics are self-
adjusting to the ambient temperature/humidity and the detector
reaches its optimum operating capabilities.
10.
Do not attempt to use the detector after the built-in battery is
discharged as this can result in damage to the battery and/or the
electronics.
11.
Always keep the electronics clean from dust, grease and
moisture. Use only dry and soft cotton cloth for cleaning.
12.
If you use the detector in areas where there is possibility of
the presence of buried weapons and/or explosives, you must
proceed with great caution. The manufacturer and the dealers are
not responsible for the any damage or injuries resulting from such
use of the detector.
13.
If you are looking for metal objects in areas where there could
be underground pipe or electrical lines, you must call the relevant
authorities responsible for the maintenance of these lines for
permission. Do not perform excavation without proper permission.
This is especially important in regions in and around cities and
industrial sites.
Golden Mask Deep Hunter Pro5 – Instruction manual
14
Summary of Contents for Deep Hunter Pro 5
Page 1: ......
