GM Electronics Ltd.
of the detector. It will be needed only a few position on the
scale.
8.
Do not press more
“RETUNE”
button!
9.
The device is ready for use.
5.Search for metal objects with frame search coil
.
The Golden Mask Deep Hunter Pro3se
is designed to be
used with large “frame” type search coils. This is the most
effective way to search for deeply buried metal objects.
The search coil must be moved slowly at a
constant height
(15 cm or more)
above the ground. Coils of type “frame” are
delivered in the form of “coil-cable loop” in length
corresponding to the respective size of the supporting frame
and a set of PVC pipes and fittings for assembling the
supporting structure of the frame. The “coil-cable loop” is
composed of series-connected conductors in a multi-conductor
special cable which form a send-receive coil. The “coil-cable
loop” is mounted onto a frame of PVC pipes, unions and
elbows attached to the PVC frame using the included “Velcro”
cable straps. The connecting cable is plugged into the
connector labeled
“Coil”
, which is mounted on the right edge
of the front panel of the electronics unit. The connector ring
must be tightened.
The search with a “frame” requires an assistant who controls
the level horizontal movement of the frame, using the included
belts. With another belt, the operator determines the height and
direction of movement and controls the detector.
Another way for individual work with a “frame” type search coils
is for the operator to stand/walk inside the frame holding both
belts while controlling the detector.
WARNING!
The use of this method, and/or any “entry” of the operator
or another assistant inside the “frame” of the Golden Mask
Deep Hunter Pro3se detector while in working mode can
suffer adverse effects caused by the very strong
electromagnetic field that can lead to serious health
problems and/or injuries!
Golden Mask Deep Hunter
pro3se
–
Instruction manual
8
