background image

GM Electronics Ltd.

7.Indication of the presence of a metal object within the
coil area.

The   signal   from   a   metal   object,   located   in   the   area   of   the
search   coil   is   indicated   by   increasing   the   frequency   of   the
sound signal (“ticking” sound). 
Most weak signals an operator is able to notice are improved
by doubling the preset frequency of the sound which is set with
the 

“AUDIO TONE On/Off” 

knob before searching starts. This

is   perceived   accurately   by   the   human   ear   and   therefore   it
needs to be set very precisely, so that the sound frequency
without  the   presence  of a  signal  to  be  only  a  few  Hz  (slow
“ticking” sound). 
Each “signal” has “start” and “end”. The  

Golden Mask Deep

Hunter   Pro3se  

has   a   very   well   expressed   “zone”   indication

from deeply buried metal objects with the use of a frame coil.
The length and width of this “zone” is a guide to the depth/size
of the metal objects. When this length is greater than the size
of   the   search   antenna   and   has   an   expressed   peak   in   the
middle this certainly indicates a deeply buried metallic object. If
the signal is of a short duration (small area), but is captured
only in the central part of the coil, then you can also expect a
deeply   buried   metal   object.   Double   audible   responses
corresponding to the passage of the front and rear ends of the
“frame” over the metal object are a sure indication of relatively
small metallic object not deeply buried. The use of a round coil
gives a slightly different and shorter signal compared to frame
coils.   After   reaching   a   certain   signal   strength   (which   will   be
indicated on the indicator  

“SIGNAL”

), the identification of the

type   of   metal   through   the   LEDs   mounted   in   the   indicating

“SIGNAL”

  will   start   to   work.   The   red   color   indicates   non-

ferrous   metals   and   green   indicates   ferrous   metals   (iron).   To
present a high probability of proper metal type identification,
when you detect a target, move the coil outside the target area,
press the  

“RETUNE”

  button and then pass the antenna over

the target from a different direction. Repeat as many times as
you want to identify the type of the metal more securely. With a
little experience, anyone can learn to recognize the nature of

Golden Mask Deep Hunter

 

pro3se

 – 

Instruction manual

 

10

Summary of Contents for Deep Hunter Pro 3SE

















Reviews: