6
After many years and numerous studies on EMF exposure, no government body including the
Occupational Safety and Health Administration (OSHA) have established permissible exposure limits
(PEL). Currently, there is no consensus on the potential health hazard from any exposure to EMF.
The mainstream scientific evidence suggests that low-power, low-frequency, electromagnetic
radiation associated with household currents like that of the infrared sauna does not constitute a
short or long term health hazard.
Assembly
Assembly Requirements
Please note that your sauna has been completely assembled and tested at the factory prior to
packaging. Please further note that the rear wall panel is intentional warped as part of the
overall design. Two adults will be needed to assemble the sauna room.
a. You will need a Philips screwdriver, ladder, and two adults to assemble.
b. Do not plug any other appliances into the power supply of the sauna room other than the
designated sauna connections/plugs.
c. Assemble the sauna room on a completely level surface.
d. Do not spray or get water on the exterior/interior walls of the sauna room. If the floor is damp,
install a floor separator to keep the sauna high & dry.
e. Do not store flammable objects or chemical substances near the sauna.
Sauna Room Assembly:
1. Structure of Infrared Sauna.
See
below.
2. Make sure all parts are present before installing the unit. See packing list below.
A.
Front Panel
B.
Floor Panel
C.
Back Panel
D.
Left Side Panel
E.
Right Side Panel
F.
Bench
G.
Bench Heater Panel
H.
Roof Panel
I.
Roof Dust Cover
J.
Floor Heater
K.
Handle
