12
12. Place (flop) cords/wires coming up to through the top of the wall panels to the outside of the wall
panels to avoid damaging the cords/wires during the roof installation. Open the door, lift the
Roof Panel up and over the sauna room, and gently lower it into place resting it on the wall panels.
Make sure that all of the cords/wires are slipped through the corresponding holes in the Roof
Panel. All of the heaters are pre-assembled. Connect the wire connectors and plugs to their
corresponding counterparts on the roof top. Make sure the connections are all sung and tight.
See FIG-13 - FIG-16
FIG-13
Slip cords/wires through
FIG-14
Connecting cords/wires/
corresponding holes connectors
FIG-15
Connect Heater Cords Sung and Tight
FIG-16
Assembling Roof Panel
