11. Installing the Ramp (can be purchased separately as an accessory)
a.
The optional wheelchair ramp can be placed in front of the door of the sauna.
It must be placed close and butted up against the exterior side of the FRONT
WALL PANEL. The smaller triangular ramp will need to be placed close and
butted up against the interior side of the FRONT WALL PANEL. (see Figure 26
and 27)
Figure 27
(interior view)
Figure 26
(exterior view)
When using the accessible wheelchair ramp, care and caution should be used when
rolling the wheelchair up and into the sauna. Be sure to keep the wheelchair in the
middle of the ramp when entering/exiting the sauna to avoid falling off the edge of
the ramp.
Operating the Sauna
NOTE: Before the sauna is turned on, remove plastic protective covering from the
CONTROL PANELS and the black plastic corners on the glass door. Please check
and confirm that the connections to the POWER SUPPLY (including the power cord),
HEAT EMITTERS, CD/RADIO, and TEMPERATURE SENSOR are connected
properly and are snug and tight. The power supply voltage and frequency must
match the requested voltage and frequency of the sauna (120VAC 15AMP
Dedicated Circuit or 120VAC 20AMP Dedicated Circuit). Please consult a certified
electrician for any electrical modifications or repairs.
Page 18
