down easily, you can loosen the guide and guide insert screws slightly to allow
for less tension and the wall panel will slide down easier. Attach the final
FRONT WALL PANEL by lifting the wall panels that have the metal knob
sticking outward and inserting it into the wall panel that has the guide bracket
with the hole. Once inserted, make sure the top of the wall panels are flush.
Install the door handle to the glass door with the natural side on the interior and
the finished side on the exterior. (see Figure 16)
Please note that the black
protection corners used to
protect the corners of the glass
door can be removed and
discarded once the sauna has
been assembled.
Figure 16
7. Placing the removable BENCHES Inside the Sauna
a. This model sauna is also designed for yoga. If yoga is to be performed
within the sauna room, the benches should not be installed. In addition
and if a yoga floor mat is to be used, do not connect the cords for the
floor heat emitters.
b.
Before placing the benches inside of the sauna, you will need to locate the
short heat emitter cords from the Accessory Box. These cords are labeled and
will connect the floor heat emitter panels to the FRONT WALL and RIGHT
SIDE WALL. If you do not want the floor heat emitters to operate, you do not
need to install these cords. See Figure 11. Next, you can place the benches
inside of the sauna. (see Figure 17 and 18)
Figure 17
Figure 18
Page 15
