3. Installing the RIGHT SIDE PANELS
a.
One adult will need to place the first of the two RIGHT SIDE PANELS up
and onto the FLOOR PANEL. Please take note of the trim molding on the
FLOOR PANEL that will insert into the bottom of the wall panels. See Figure
10. Once the first of the two RIGHT SIDE PANELS has been placed onto the
FLOOR PANEL and the trim molding on the FLOOR PANEL is inserted, a
second adult will need to lift the second of the two RIGHT SIDE PANELS up
and onto the FLOOR PANEL. In addition, the RIGHT SIDE PANEL with the
guide bracket that has the metal knob sticking outward will need to be lifted
up and inserted into the other RIGHT SIDE PANEL with the guide bracket
that has the hole. Once inserted, the wall panel will need to slide downward
until the top of the two wall panels are flush with one another. If the wall
panels are tight and not sliding down easily, you can loosen the guide and
guide insert screws slightly to allow for less tension and the wall panel will
slide down easier. Figure 11 shows the location of the heat emitter ports in
reference to the RIGHT SIDE PANEL.
1 of the 2 RIGHT
2 of the 2 Right
SIDE PANELS
SIDE PANELS
Installed
Installed
Figure 10 Trim Molding
Right Side of
Sauna
Right Rear Heat
Emitter Ports
Right Front
Heat Emitter
Figure 11 Port
Page 12
