Goldair Select GSFH18, Operating Instructions Manual

Page: 5 / 8

Care and Cleaning
TECHNICAL SPECIFICATION
Model No: GSFH18
Supply: 220-240VAC 50Hz
Wattage: 1800-2000W
SUPPORT AND TECHNICAL ADVICE
Goldair – New Zealand
Monday – Friday 8am-5pm
Phone +64 (0)9 917 4000
Phone 0800 232 633
info@cdb.co.nz
Goldair – Australia
Monday – Friday 8am-5pm
Phone +61 (0)3 9365 5100
Phone 1300 465 324
info@cdbgoldair.com.au
CARE AND CLEANING
The heater requires regular cleaning to ensure
trouble free operation:
Unplug the heater from the mains supply before
cleaning.
Ensure that the heater has been allowed to cool
down completely before cleaning.
Use a damp cloth (not wet) to wipe the exterior of
the heater to remove dust and dirt.
Never use solutions such as benzene, thinners or
polishing agents.
Use a vacuum cleaner to remove dust and fluff from
around the grills and fins.
Ensure the heater is dry before plugging back into
the mains supply.
Do not attempt to dismantle the Fan Heater. There
are no user serviceable parts. For service or repair,
contact an authorised electrical service technician.
PROOF OF PURCHASE
To receive warranty retain receipt as proof of
purchase.
SAFETY DEVICES
This appliance has three protection devices:
1.
Tilt switch - this will automatically turn the
appliance off if the appliance is not in the
appropriate operating position.
2. Resettable thermal link - this will automatically
disconnect the power to the appliance at a pre-
set overheat temperature. After cooling down it
will reset and power on again. If this occurs,
investigate what is causing the appliance to
overheat.
3. Thermal fuse - this disconnects the appliance
permanently in case of overheating. (It is non
resettable).