Goldair Select GSFH18, Operating Instructions Manual

Page: 4 / 8

Operating your Appliance
THERMOSTAT
Turn the thermostat knob clockwise until you reach
the maximum position on the graduated scale.
When the room reaches a comfortable temperature,
slowly turn the knob anti-clockwise until the heater
turns off (you will hear a click). The heater will now
cycle on and off to maintain the set comfort level.
Take note of this position setting for future use. WARNING: Keep all objects at least 1 metre from
the front, sides and rear of the appliance.
WARNING: In order to avoid overheating or risk of
fire, do not cover the heater.
WARNING: Never leave this appliance unattended
when in use.
WARNING: Do not use this appliance with a
programmer, remote-control system, separate
timer or any other device that switches the
appliance on automatically.
Note: When the appliance is turned on for the first
time, it may release a slight, odour or smoke. This
odour or smoke is a normal occurrence caused by
the initial heating of the internal heating elements
and should not occur again.
HEAT CONTROL SWITCH
The control switch positions are:
“ 0 ” = OFF
= Fan Only
“I” = Low Heat
“II” = High Heat
Check that the heat control switch is set to Off
position before plugging the heater into the mains
supply. For greater economy, use the High Heat
setting initially and then switch to the Low Heat
setting.
For the Low and High Heat settings the fan remains
at the same speed; only the element changes to
create the greater/lesser heat output.
Always choose a safe location for the heater, keeping in mind the safety precautions
outlined. Ensure all packaging has been removed from the unit before use. This
appliance requires no installation, it should be used solely as a portable appliance.