Goldair SELECT GSFH150, Operating Instructions Manual

Page: 4 / 8

WARNING: Keep all objects at least 1 metre
from the front, sides and rear of the
appliance.
WARNING: In order to avoid overheating or
risk of fire, do not cover the heater.
WARNING: Never leave this appliance
unattended when in use.
WARNING: Do not use this appliance with a
programmer,
remote-control system,
separate timer or any other device that
switches the appliance on automatically.
Note: When the appliance is turned on for
the first time, it may release a slight, odour
or smoke. This odour or smoke is a normal
occurrence caused by the initial heating of
the internal heating elements and should
not occur again.
HEAT CONTROL SWITCH
The control switch positions are:
“0” = OFF
= Fan Only
“I” = Low Heat
“II” = High Heat
Check that the heat control switch is set to Off
position before plugging the appliance into the
mains supply. For greater economy, use the
High Heat setting initially and then switch to the
Low Heat setting.
For the Low and High Heat settings the fan
remains at the same speed; only the element
changes to create the greater/lesser heat
output.
Operating your Appliance
Always choose a safe location for the heater, keeping in mind the safety
precautions outlined. Ensure all packaging has been removed from the
unit before use. This appliance requires no installation, it should be used
solely as a portable appliance.
THERMOSTAT
Turn the thermostat knob clockwise until you
reach the maximum position on the graduated
scale. When the room reaches a comfortable
temperature,
slowly turn the knob anti-
clockwise until the appliance turns off (you will
hear a click). The appliance will now cycle on
and off to maintain the set comfort level. Take
note of this position setting for future use.
SAFETY DEVICES
This appliance has three protection devices:
1. Tilt switch - this will automatically turn the
appliance off if the appliance is not in the
appropriate operating position.
2. Resettable thermal link - this will
automatically disconnect & reconnect the
power to the appliance at a pre-set
temperature.
3. Thermal fuse - this disconnects the
appliance permanently in case of
overheating. (It is non resettable).
CAUTION: The appliance generates heat
during use. Proper precautions must be taken
to prevent the risk of burns, scalds, fires or
other damage to persons.