Then connect the second set of mounting brackets to the brackets on the heater. (fig.5) Position the
mounting bracket on the ceiling or alternative overhead structure and mark the hole positions and
check they are straight.
Remove the second set of mounting brackets and secure to the ceiling. Note these heaters are
heavy and need to be mounted securely.
Once secured, mount the heater bracket to the secured brackets either facing straight down or at an
angle provided that the edge of the heater is pointed away from any adjacent wall, the ceiling or
overhead structure.
Installation Guide
CEILING MOUNTING CONTINUED
Fit the mounting bracket to the back of the heater by screwing the two wing screws (fig.2) through
the mounting bracket into the slots on the back of the heater and securely tighten them in place as
shown in fig.3 and fig.4. Do not secure a bracket to the control panel.
Fig. 5
Fig. 2
175mm
CONTROL PANEL END
Fig. 3
OTHER END
Fig. 4
