![background image](http://html.mh-extra.com/html/goldair/platinum-gpord02-18/platinum-gpord02-18_operating-instructions-manual_2239962004.webp)
Installation Guide
WALL MOUNTING
Make sure the heater is unplugged before installing.
Position the heater within one metre of a wall socket. Do not mount in front of or below the wall
socket.
It is recommended that the heater is mounted at least 2m above the ground.
Ensure there is at least 150mm clearance from the ends of the heater to any adjacent wall and
200mm above the brackets to any ceiling or overhead structure. (fig.1)
Fit the mounting bracket to the back of the heater by screwing the two wing screws (fig.2) through
the mounting bracket into the slots on the back of the heater and securely tighten them in place as
shown in fig.3 and fig.4. Do not secure a bracket to the control panel.
Fig. 2
175mm
CONTROL PANEL END
Fig. 3
OTHER END
Fig. 4
2
0
0
m
m
2
0
0
0
m
m
150mm
Fig.1