Press the Power/Mode (C) button and the heater will cycle through LOW, MED,
HIGH and ECO modes.
In the LOW, MED and HIGH modes the heater will continue to run uninterrupted as
the thermostat does not work in these modes.
SETTING THE TEMPERATURE ECO MODE ONLY
Press the MODE button until the
“ECO”
symbol is shown in the display.
Now press the thermostat (a) button and the temperature digits will blink.
Use the
“+”
and
“
-
”
button to set your desired temperature from 10-30 degrees
Celsius.
After the desired temperature is set the temperature digits will stop blinking and
the current room temperature will appear.
When the heater reached the set temperature it will switch on and off
automatically to maintain the set temperature.
To find your preferred heat setting; Set the thermostat to the maximum setting.
When the room reaches a comfortable temperature for you, look at the
temperature reading on the heater and then set the heater to this temperature.
The heater will now cycle on and off to maintain the set temperature.
NOTE: the temperature is read from a thermostat in the heater, for a more
accurate reading, position a separate thermometer in another part of the room.
TURNING HEATER OFF
Press the stand-by button [F] until sleep mode is selected and the control panel
screen goes off.
Press the on/off switch [F] to turn the appliance off completely.
To disconnect the appliance, remove the plug from the socket.
SET THE TIMER TO AUTO-OFF
This function should only be set if you want the heater to automatically shut off
after a certain period of time(1 to 24 hours from the time the function is set).
When heater working, press the Timer button(d), the light on(H) will turn on, and
the start hour digit (0.0) will blink.
Use the “+” and “
-
” buttons [b] and [e] to set the heater operation time between 1
and 24 hours. 0.0-5.0 hours increase by 0.5 hour, 5.0-24 hours increase by 1 hour.
This function will activate once the hour digit stops blinking. The count down digits
will show on the display.
The heater will automatically shut off when the time runs out.
Operating Your Oil Column Heater
