![background image](http://html1.mh-extra.com/html/goldair/platinum-gpoc4310/platinum-gpoc4310_operating-instructions-manual_2240284007.webp)
Operating Your Oil Column Heater
CONTROL PANEL
A. Thermostat button
B. + Temperature & hours increase button
C. Power/Mode button
D. Timer button
E.
-
Temperature & hours decrease button
F.
Power/stand-by button
REMOTE CONTROL
Check that the heat control switch is set to Off position before plugging the heater
into the mains supply.
Press the On/Off switch located on the side of heater to the
“I”
ON position.
A beep will sound and the
symbol will illuminate on the control panel.
Press the stand-by button (F) once to exit standby mode and start the heater in
low heat mode.
The
symbol will show on the screen.
a
b
c
f