Operating Your Oil Column Heater
SAFETY DEVICES
This appliance has three protection devices:
The first device will automatically turn the
appliance off if the appliance is not in the
appropriate operating position.
The second device automatically disconnects &
reconnects
the
appliance
at
a
pre-set
temperature.
The third device disconnects the appliance
permanently in case of overheating, by means of
a thermal fuse. (It is non resettable).
IMPORTANT! NEVER COVER THIS HEATER
WARNING: Do not use this heater with a
programmer,
separate
timer,
remote-control
system or any other device that switches the
heater on automatically, since a fire risk exists if
the heater is covered or positioned incorrectly.
CAUTION: The heater generates heat during use.
Proper precautions must be taken to prevent the
risk of burns, scalds, fires or other damage to
persons.
Goldair
– New Zealand
Monday
– Friday 8am-5pm
Phone +64 (0)9 917 4000
Phone 0800 232 633
[email protected]
Goldair
– Australia
Monday
– Friday 8am-5pm
Phone +61 (0)3 9336 4423
Phone 1300 465 324
SUPPORT AND TECHNICAL ADVICE
CARE AND CLEANING
The heater requires regular cleaning to ensure
trouble free operation:
Unplug the heater from the mains supply before
cleaning.
Ensure that the heater has been allowed to cool
down completely before cleaning.
Use a damp cloth (not wet) to wipe the exterior of
the heater to remove dust and dirt.
Never use solutions such as benzene, thinners or
polishing agents.
Use a vacuum cleaner to remove dust and fluff
from around the grills and fins.
Ensure the heater is dry before plugging back into
the mains supply.
Do not attempt to dismantle the heater. There are
no user serviceable parts. For service or repair,
contact
an
authorised
electrical
service
technician.
PROOF OF PURCHASE
To receive warranty retain receipt as proof of
purchase.