SETTING THE TEMPERATURE
Press the MODE button until the Temperature
Icon blinks .
Use the
“+” and “-” button to set your desired
temperature.
After the desired temperature is set the
Temperature Icon will stop blinking and the
current room temperature will appear.
The heat will turn-off shortly after the set room
temperature is reached and the Temperature
display will blink.
The heater will turn back on when the room
temperature drops below the set temperature.
The temperature display will then stop blinking
and will display the current room temperature.
NOTE: The temperature display will not reflect an
accurate room temperature until the heater has
been operating for at least 20 minutes.
FAHRENHEIT/CELSIUS FUNCTION
This heater offers the option to read the
temperature setting in either Fahrenheit or
Celsius.
F/C feature functions from only the Power or Set
Temperature screens.
Press F/C button to toggle between Fahrenheit
and Celsius.
Operating Your Oil Column Heater
Always choose a safe location for the heater, keeping in mind the safety
precautions outlined. Ensure all packaging has been removed from the
unit before use. This appliance requires no installation, it should be used
solely as a portable appliance.
WARNING Keep all objects at least 1 metre
from the front, sides and rear of the appliance.
HEAT CONTROL SWITCH
Check that the heat control switch is set to Off
position before plugging the heater into the mains
supply.
Press the On/Off switch on the side of the heater
to On (I).
Press the power button in the centre of the
control panel once to start the heater on High
Heat( ). If left at this setting , the unit will run
continuously on High Heat and will not shut off
until the unit is manually turned off.
Press the power button again to change to Low
Heat ( ). If left at this setting, the unit will run
continuously on Low Heat and will not shut off
until the unit is manually turned off.
Press the power button a third time to turn the
heater OFF, and then press the On/Off switch
along the side of the heater to Off (O).
For greater economy, use the High Heat setting
initially and then switch to the Low Heat setting.
Temperature Icon
F/C
Temperature
Display
