INSTRUCTIONS FOR USE CONTINUED
b.Hepa outlet filter
1.) Open the cover by pressing the front cover release and lifting up
2.) Take out the Hepa outlet filter and clean or replace.
Please note:
The sponge filter material in the vacuum that sits above the Hepa filter will became dusty over time.
This is normal and will not affect the performance of the filter. If the sponge filter is so dusty that suction
does not return to 100%, then we suggest that the filter be removed then rinsed under water and
allowed to air dry for 24 hours. Do not air near the fire or high temperature objects. This should be done
once every six months or when suction appears to be reduced.
The Hepa filter should also be rinsed under warm water when the suction of the vacuum appears to be
reduced or every 6 months, which ever occurs first.
Note:
The suction hole must be open and free of any obstructions at all times. Otherwise, the motor will
overheat and may become damaged.
Important:
All filters should be checked regularly for signs of damage, preferably after each cleaning task. The
filters must be replaced immediately if they become damaged. Always disconnect the vacuum from the
electrical outlet when checking the filters.
1
2
Outlet filter grill
SUPPORT AND TECHNICAL ADVICE
North Shore City, Auckland, New Zealand
Monday – Friday 8am-5pm
Phone: 0800 232 633
Website: www.goldair.co.nz