background image

General Care and Safety Guide 

Thank  you  for  choosing  a  Goldair  Panel  Heater.  This  Goldair  Heater  has 
been  designed  and  manufactured  to  high  standards  of  engineering  and 
with proper use and care, as described in this leaflet,   will give you years 
of useful service. Please read these instructions carefully. 

TECHNICAL SPECIFICATION 

Model No: 

 GPPH500, GPPH510, GPPH520, GPPH530 

Supply: 

 220-240VAC 50Hz 

Wattage: 

 500W, 900-1000W, 1350-1500W, 1800-2000W 

1.

Use only the voltage specified on the rating label of 

the appliance. 

2.

Keep  all  objects  at  least  1  metre  from  the  front, 

sides and rear of the appliance. 

3.

This  appliance  is  intended  for  household  use  only 

and not for commercial or industrial use. 

4.

Indoor use only. 

5.

Use this appliance only as described in this manual. 

Any  other  use  is  not  recommended  by  the 
manufacturer  and  may  cause  fire,  electric  shock  or 
injury. 

6.

The  common  cause  of  overheating  is  deposits  of 

dust or fluff in the appliance. Ensure these deposits 
are  removed  regularly  by  unplugging  the  appliance 
and vacuum cleaning the air vents and grills. 

7.

Always unplug appliance when not in use. 

8.

When the appliance has been unpacked, check it for 

transport  damage  and  ensure  all  parts  have  been 
delivered.  If  parts  are  missing  or  the  appliance  has 
been  damaged,  contact  the  Goldair  Customer 
Services Team.  

9.

If  your  appliance  does  not  work,  or  is  not  working 

properly,  contact  the  place  of  purchase  or  the 
Goldair Customer Services Team.  

10.

Do  not  connect  the  appliance  to  mains  supply  until 

completely assembled and adjusted. 

11.

Ensure  hands  are  dry  before  handling  the  plug  or 

main unit. 

12.

Do  not  locate  the  appliance  directly  below  any 

power socket outlet. 

13.

Ensure  heater  is  on  a  flat,  stable,  heat-resistant 

surface. 

14.

Do  not  operate  with  cord  set  coiled  up  as  a  heat 

build up is likely, which could be sufficient to become 
a hazard. 

15.

Carry  out  regular  checks  of  the  supply  cord  to 

ensure no damage is evident. 

16.

Do not operate this appliance with a damaged cord, 

plug or after the appliance malfunctions or has been 
dropped  or  damaged  in  any  manner.  Return  to  a 
qualified electrical person for examination, electrical 
service or repair. 

17.

Do  not  twist,  kink  or  wrap  the  cord  around  the 

appliance,  as  this  may  cause  the  insulation  to 
weaken  and  split.  Always  ensure  that  all  cord  has 
been  removed  from  any  cord  storage  area  and  is 
unrolled before use. 

18.

It  is  recommended  that  this  heater  is  plugged 
directly into the wall socket.  Power boards are not 
rated to supply power to high wattage appliances. 

19.

A  correctly  specified,  undamaged  extension  cord 
may be used with this heater provided it is used in 
a safe manner. 

20.

Do  not  remove  plug  from  power  socket  until  the 
appliance has been switched off. 

21.

Do not remove plug from power socket by pulling 
cord; always grip plug. 

22.

Do not place cord under carpet or cover with rugs 
or  furniture.  Arrange  the  cord  so  it  cannot  be 
tripped over. 

23.

Don’t  place  appliance  on  bedding  or  on  thick  & 
long carpet where the openings may get blocked. 

24.

Switch off and use handle provided when moving 

25.

Do  not  place  appliance  close  to  radiant  heat 
source. 

26.

Never use the appliance to dry clothes. 

27.

Do not insert or allow foreign objects to enter any 
ventilation or exhaust opening, as this may cause 
an electric shock, fire or damage to the appliance.  

28.

Do not sit on the appliance. 

29.

Do  not  use  abrasive  cleaning  products  on  this 
appliance.  Clean  with  a  damp  cloth  (not  wet) 
rinsed  in  hot  soapy  water  only.  Always  remove 
plug from the mains supply before cleaning. 

30.

Do  not  operate  in  areas  where  petrol,  paint  or 
other flammable liquids are used or stored. 

31.

This appliance is not intended for use by persons 
(including children) with reduced physical, sensory 
or  mental  capabilities  or  lack  of  experience  and 
knowledge,  unless  they  are  supervised  or  have 
been  given  instruction  concerning  the  use  of  the 
appliance by a person responsible for their safety. 

32.

Children should be supervised to ensure that they 
do not play with the appliance. 

33.

Do  not  use  this  appliance  in  the  immediate 
surrounds of a bath, a shower, or a swimming pool 
or  other  liquids.  The  appliance  must  not  be 
immersed in any liquids. 

34.

There  are  no  user  serviceable  parts  installed  in 
the unit. 

35.

Do  not  place  the  unit  in  wardrobes  or  other 
enclosed spaces as this may cause fire hazards. 

36.

This unit is not supposed to be used in or around 
locations where foodstuffs, works of art or delicate 
articles of science, etc are stored. 

37.

WARNING  you  must  not  cover  this  heater. 
Covering  this  heater  presents  fire  risk  and  will 
activate the safety fuse; permanently disabling the 
unit. 

Summary of Contents for GPPH500









Reviews: