![Goldair GPPH500 Operating Instructions Manual Download Page 5](http://html.mh-extra.com/html/goldair/gpph500/gpph500_operating-instructions-manual_2239957005.webp)
Green
Catechin Filter
Catechin is a natural anti-bacterial substance
derived from tea leaves that kills germs
BIO FILTER
Blue/Grey
Activated Carbon Filter
Deodorises air and absorbs unpleasant smells
WARNING: Keep all objects at least 1 metre
from the front, sides and rear of the
appliance.
WARNING: In order to avoid overheating, do
not cover the heater.
WARNING: Never leave this heater
unattended.
WARNING: Take care in positioning your
heater, using the Timer will mean the heater
will come on automatically. Fire may result if
the heater has been placed next to
combustible material.
CONTROL PANEL
All Models
Always choose a safe location for the heater,
keeping in mind the safety precautions outlined.
Ensure all packaging has been removed form
the unit before use. Check that the heater is
switched off before plugging into the mains
supply.
Turn the Power switch "ON“, which is on the
right hand side of the heater just below the
control panel.
Press the button. A beep will sound
indicating the heater is either in standby mode or
in the
mode prior to being turned off.
Press the button to select the power
setting; options are either full setting or half
setting.
THERMOSTAT
Set the desired temperature by pressing the UP
or DOWN buttons in the normal
operating mode.
TIMER
Set the timing function by pressing the “SET”
button in the normal operating mode, When the
“TIMER” sign on the screen starts flashing, use
the UP or DOWN buttons to set the
desired shutdown time. From 1 to 24 hours.
Note: You cannot set a specific turn on or turn
off time.
Lock the control panel while the heater is in
normal operating mode or in standby:
P r e s s a n d h o l d t h e U P a n d D O W N
buttons at the same time (for 3 seconds) until
the lock symbol (padlock) is displayed. All the
control functions are now locked, and the
buttons will no longer operate until unlocked.
Use the same sequence to unlock the control
panel.
The heater is fitted with an “anti-frost” mode
which can be activated by pressing the SET
button twice. This will illuminate the
symbol on the control panel and the
heater will automatically come on if the
temperature drops below 7 degrees. Note the
heater has to be turned on for this function to
work. To deactivate this mode press the SET
button again.
Operating Your Panel Heater
Always choose a safe location for the heater, keeping in mind the safety
precautions outlined. Ensure all packaging has been removed from the
unit before use. This appliance requires no installation, it should be used
solely as a portable appliance.
Yellow
Vitamin C Filter
fills the air with vitamin C which helps to reduces
stress and has therapeutic benefits
Place the small filters on the large filter as
shown below. You can choose any combination
but you can only use of the additional 2 filters at
a time