Operating Your Oil Column Heater
SET THE TIMER TO AUTO-OFF
This function should only be set if you want the
heater to automatically shut off after a certain
period of time(1 to 24 hours from the time the
function is set).
When heater working, press the Timer button(d),
the light on(H) will turn on, and the start hour digit
(0.0) will blink.
Use the “+” and “-” buttons [b] and [e] to set the
heater operation time between 1 and 24 hours.
0.0-5.0 hours increase by 0.5 hour, 5.0-24 hours
increase by 1 hour. This function will activate
once the hour digit stops blinking. The count
down digits will show on the display.
The heater will automatically shut off when the
time runs out.
SET THE TIMER TO AUTO-ON
This function provides a delayed start option and
should only be set if you want the heater to
automatically turn ON after a certain period of
time (1 to 24 hours from the time the function is
set).
Press the on/off power switch [f] to turn the
appliance on. The light on(
) will turn on. The
appliance will be in Stand-by mode.
Press the Timer button(d), the light on(H) will turn
on, and the start hour digit (0.0) will blink.
Use the
“+” and “-” buttons [b] and [e] to set the
heater operation time between 1 and 24 hours.
0.0-5.0 hours increase by 0.5 hour, 5.0-24 hours
increase by 1 hour. This function will activate
once the hour digit stops blinking. The count
down digits will show on the display.
The heater will automatically turn on when the
time runs out.
NOTE: After setting the auto-on timer, set your
power and ECO mode settings. And under ECO
mode, make the temperature settings. So that the
heater will turn on at the desired temperature or
power setting.
Note : When using timer modes, consideration
should be given to the fact that the heater may
come on whilst unattended. Always follow the
safety instructions provided.
