Measure the distance between the mounting slots on the back of the heater. Now
mount one of the wall brackets to the wall so that it is in the right location to hold
the heater. Next mount the other bracket to the wall in the correct position to
locate the other slot in heater. Ensure they are level. Also ensure these brackets
are firmly fastened to the wall.
Secure the “L” shaped wall bottom mounting brackets to the bottom of the heater
with the wall mounting part pointing down below the heater as shown below.
These mount in the same position as the castor plates except they are only held by
2 screws. These brackets will hold the heater base in the right position from the
wall.
Now mount the heater onto the top mounting brackets.
Once the heater is mounted correctly, screw the bottom wall mounting brackets
to the wall to secure them.
Mounting Slots