background image

1. Use  only  the  voltage  specified  on  the  rating 

plate of the appliance. 

2. Keep  all  objects  at  least  1  metre  from  the 

front, sides and rear of the appliance.  Do not 
place appliance close to radiant heat source. 

3. Do not operate in areas where petrol, paint or 

other flammable liquids are used or stored. 

4. Do not insert or allow foreign objects to enter 

any  ventilation  or  exhaust  opening,  as  this 
may cause an electric shock, fire or damage 
to the appliance. 

5. Do  not  operate  this  appliance  with  a 

damaged  cord,  plug  or  after  the  appliance 
malfunctions  or  has  been  dropped  or 
damaged  in  any  manner.  Return  to  a 
qualified  electrical  person  for  examination, 
electrical service or repair. 

6. This appliance is intended for household use 

only and not for commercial or industrial use. 

7. Use  this  appliance  only  as  described  in  this 

manual.  Any  other  use  is  not  recommended 
by  the  manufacturer  and  may  cause  fire, 
electrical shock or injury. 

8. The  common  cause  of  overheating  is 

deposits  of  dust  or  fluff  in  the  appliance. 
Ensure these deposits are removed regularly 
by  unplugging  the  appliance  and  vacuum 
cleaning the air vents and grills. 

9. Do  not  use  abrasive  cleaning  products  on 

this  appliance.  Clean  with  a  damp  cloth  (not 
wet)  rinsed  in  hot  soapy  water  only.  Always 
removed  plug  from  the  mains  supply  before 
cleaning. 

10.Do  not  connect  the  appliance  to  mains 

voltage  until  completely  assembled  and 
adjusted. 

11.Switch  off  and  use  handles  provided  when 

moving. 

12.Do  not  operate  with  cord  set  coiled  up  as  a 

heat  build  up  is  likely,  which  could  be 
sufficient to become a hazard. 

13.The  use  of  an  extension  cord  with  this 

appliance is not recommended. 

 

14. Do  not  remove  plug  from  power  socket  until 

the appliance has been switched off. 

15. Do  not  remove  plug  from  power  socket  by 

pulling cord 

– always grip plug. 

16. Always unplug appliance when not in use. 
17. Do not twist, kink or wrap the cord around the 

appliance, as this may cause the insulation to 
weaken and split. 

18. This  appliance  is  not  intended  for  use  by 

young  children  or  infirm  persons  unless  they 
have  been  adequately  supervised  by  a 
responsible  person  to  ensure  that  they  can 
use the appliance safely. 

19. Do  not  use  this  appliance  in  the  immediate 

surrounds of a bath, a shower, or a swimming 
pool  or  other  liquids.  The  appliance  must  not 
be immersed in any liquids. 

20. When  the  appliance  has  been  unpacked, 

check  if  for  transport  damage  and  ensure  all 
parts have been delivered. If parts are missing 
or  the  appliance  has  been  damaged,  contact 
the Goldair Customer Services Team. (refer to 
details on back page) 

21. If  your  appliance  does  not  work,  or  is  not 

working  properly,  contact  the  place  of 
purchase  or  the  Goldair  Customer  Services 
Team. (refer to details on back page). Repair 
work on the appliance by unqualified persons 
can cause serious risk to the user. 

22. There  are  no  user  serviceable  parts  installed 

in the unit. 

23. Do not put your fingers or other articles into or 

near  the  air  inlet  or  outlet.  Do  not  sit  on  the 
unit. 

24. Do  not  place  the  unit  in  wardrobes  or  other 

enclosed  spaces  as  this  may  cause  fire 
hazards. 

25. This  unit  is  not  supposed  to  be  used  in  or 

around  locations  where  foodstuffs,  works  of 
art  or  delicate  articles  of  science,  etc  are 
stored. 

 

WARNINGS AND SAFEGUARDS 

Summary of Contents for GIR300






Reviews: