Assembly
Before using this appliance, remove all packing. Check to ensure that all parts of this
heater, cord and plug are not damaged. Confirm all parts before disposing of carton.
Do not leave packaging materials like bags and staples within reach of children or
animals.
Portable Operation:
1.
Place the lower post assembly on the base in such a way that the screw holes are
aligned.
2.
Insert the 3 x bolts through the double holes and tighten them firmly. Place the
protective cover over the screw connection and remove the cable holder for a
moment.
3.
Push the middle post assembly section over the lower post assembly and fasten it
in place with one of the screws.
4.
Attach the top post assembly to the middle post assembly in the same manner
with a screw.
5.
Insert the adjustable post section as far as you wish into the compression coupling
on top of the stand. Slide the locking ring down over the adjustable post section
and screw it firmly with the compression coupling.
6.
Unscrew the mounting screw almost completely out of the mounting bracket.
Place the head of the heater over the top of the adjustable stand section in such a
way that the screw falls precisely into the hole in the stand. Now tighten the screw
firmly (the screw must disappear into the adjustable post section and must not
protrude). The adjustable post section can rotate 360°, enabling the head of the
heater to point in any direction.
7.
The cable holder can now be placed back onto the stand and the cable can be
secured in the holders.
8.
Check that all connections are secure and that the heater is securely in position
before using it.
9.
The heater must be placed at a distance of at least 1m from the nearest wall. The
top of the heater must be at least 30cm from the ceiling and at least 1.8m above
the floor.
