![background image](http://html1.mh-extra.com/html/goldair/gfe320/gfe320_operating-instructions-manual_2240200007.webp)
FIREPLACE STAND
It is possible to install the electric fireplace on a stand, instead of mounting it on the
wall.
Remove the tempered glass panel from the metal body and place the heater face up
on a suitable surface.
•
In the lower part of the body there are some screws, which need to be aligned to
the holes on the stand. This will then mean the screw holes on the base and the
bottom of the unit will then line up correctly.
•
Use the 4 screws that are supplied, secure the base to the lower side of the main
body.
•
Replace the front surround over the front of the heater aligning the slots in the
brackets at each side of the front panel with the lugs on the sides of the heater.
Two people will be required for this operation.
•
Then fit the one-way screw into the hole on the bottom of the right lateral hook to
stop the front surround from being removed.
•
Place the unit on a flat and stable surface.
This side goes to front of heater
Installing Your Heater